initiate an emergency call on the pro-
grammed home group. If no home group
is programmed into the radio the emer-
gency call will be transmitted on the se-
lected group.
In conventional mode, initiating an
emergency call by pressing the EMER-
GENCY BUTTON will cause the radio to
transmit GE-STAR emergency signaling
on the programmed emergency channel.
If no emergency channel is programmed,
GE-STAR emergency signaling will be
transmitted on the selected channel.
STEP BUTTON
(Scan And System Models Only)
The STEP button located on the key-
pad can be programmed to select trunked
groups and conventional channels or it can
be programmed to select systems. See the
sect io n e ntitled "SYSTEM/GROUP/
CHANNEL SELECTION" for details.
STEP is also used to scroll through the
programmed special call table when the
special call mode is enabled.
SCAN BUTTON
(Scan And System Models Only)
Pressing the SCAN button on the key-
pad will toggle scan operation on and off
When the radio is scanning, the "SCN"
status flag in the display will turn on and all
groups/channels on the scan list in the
current system will be scanned.
SPC BUTTON
(Scan And System Models Only)
Pressing SPC will switch operation
from the group select mode to the special
call mode. The last selected special call
will be displayed.
While in special call mode, the next
programmed special call can be selected
by pressing STEP. Pressing 2nd then
STEP will select the previous programmed
special call. The caller’s ID of the last
received individual call and the last re-
ceived group call on the selected group are
a selectable using this method. See "Spe-
cial Calls" for details.
9
Summary of Contents for M-PA EDACS
