Radio Configurations, RBS 2106 and RBS 2206
4
Radio Configurations, RBS 2106 and
RBS 2206
This chapter describes the dTRU-based radio configurations and their
performance. Note that the GSM 800 configurations are valid from
BSS R9.
4.1
Introduction
4.1.1
Mobile Telephone System
Figure 2
RBS 2000 in the Ericsson GSM system
The Base Station System (BSS) contains two functional entities: the
Base Station Controller (BSC) and the Base Transceiver Station (BTS).
The BSC handles radio-related functions, such as handover,
management of the radio network resources, and cell configuration data.
It also controls radio frequency power levels in RBSs and MSs.
The BTS is a network component which serves one cell and is
controlled by the BSC. The BTS contains a number of transceivers. It
consists of the radio transceivers and all the digital signal processing
equipment. RBS 2000 contains equipment for 1 - 3 BTSs.
EN/LZT 720 0008
P2A
2001-11-28
33 (485)
© Ericsson Radio Systems AB
— All Rights Reserved —
P
re
li
m
in
a
ry
Summary of Contents for RBS 2106
Page 2: ...P r e l i m i n a r y ...