Receiving a Call
When you receive a call, the phone rings and the indica-
tor light on top of the phone blinks green rapidly. The
display shows ‘Answer?’.
If your subscription includes the Calling Line Identifica-
tion service and the caller’s network sends the number,
you will see the caller’s number at the bottom of the
display. If the number is stored with a name in the
phone book, the name will be shown in the display.
Note!
The phone must be turned on and within coverage of a
network before a call can be received.
To Answer the Call
Press
YES
.
When the call is finished, press
NO
.
Tip!
To mute the ring signal when you receive a call, press
CLR
.
To Reject the Call
There are two ways of rejecting the call:
•
Press the
NO
key.
•
Press the volume key on the side of the phone
twice.
The caller will hear a busy tone if the caller’s network
supports this function. If ‘Divert on busy’ is activated,
the incoming call is diverted to the number you have
specified (see ‘Diverting Incoming Calls’).
Redialling a Number
Your SH 888 conveniently lets you redial the last phone
numbers you have called (15 or more, depending on
your SIM card). It can also redial a number auto-
matically if the connection failed when you first called.
To Redial Previously Called Numbers
Press
YES
. The display now shows the last di-
alled number.
Press the navigation key
RIGHT
or
LEFT
until the
number you want to call is shown on the
bottom row of the display.
Press
YES
to make the call.
Note!
If you want to clear the last dialled numbers memory,
do the following:
Press the navigation key
LEFT
. The ‘Phone book’
menu appears.
Press
YES
to enter the ‘Phone book’ menu.
Press the navigation key
LEFT
until the ‘Dialled
numbers’ function appears.
Press
YES
to select the ‘Dialled numbers’ func-
tion.
Press and hold the
CLR
key. The question ‘Erase
all?’ appears.
Press
YES
to erase the last dialled numbers from
the memory.
Press
CLR
to return to standby mode.
The Automatic Redialling Function
If the connection fails and the receiver’s network
supports it, the display shows ‘Retry?’ on the top row
and the reason for the failure on the second row.
To redial the number automatically:
l
Press
YES
.
• The number will automatically be redialled
until the call is answered, up to 10 times.
• If you press any key or receive a call, the re-
dialling will be interrupted.
• If the redialling is successful, the phone will
beep and then you will hear a ring signal.
If you do not want to retry, press
NO
.
10
Press
to enter the menu system. See inside the cover.
Receiving a Call
When you receive a call, the phone rings and the indica-
tor light on top of the phone blinks green rapidly. The
display shows ‘Answer?’.
If your subscription includes the Calling Line Identifica-
tion service and the caller’s network sends the number,
you will see the caller’s number at the bottom of the
display. If the number is stored with a name in the
phone book, the name will be shown in the display.
Note!
The phone must be turned on and within coverage of a
network before a call can be received.
To Answer the Call
Press
YES
.
When the call is finished, press
NO
.
Tip!
To mute the ring signal when you receive a call, press
CLR
.
To Reject the Call
There are two ways of rejecting the call:
•
Press the
NO
key.
•
Press the volume key on the side of the phone
twice.
The caller will hear a busy tone if the caller’s network
supports this function. If ‘Divert on busy’ is activated,
the incoming call is diverted to the number you have
specified (see ‘Diverting Incoming Calls’).
Redialling a Number
Your SH 888 conveniently lets you redial the last phone
numbers you have called (15 or more, depending on
your SIM card). It can also redial a number auto-
matically if the connection failed when you first called.
To Redial Previously Called Numbers
Press
YES
. The display now shows the last di-
alled number.
Press the navigation key
RIGHT
or
LEFT
until the
number you want to call is shown on the
bottom row of the display.
Press
YES
to make the call.
Note!
If you want to clear the last dialled numbers memory,
do the following:
Press the navigation key
LEFT
. The ‘Phone book’
menu appears.
Press
YES
to enter the ‘Phone book’ menu.
Press the navigation key
LEFT
until the ‘Dialled
numbers’ function appears.
Press
YES
to select the ‘Dialled numbers’ func-
tion.
Press and hold the
CLR
key. The question ‘Erase
all?’ appears.
Press
YES
to erase the last dialled numbers from
the memory.
Press
CLR
to return to standby mode.
The Automatic Redialling Function
If the connection fails and the receiver’s network
supports it, the display shows ‘Retry?’ on the top row
and the reason for the failure on the second row.
To redial the number automatically:
l
Press
YES
.
• The number will automatically be redialled
until the call is answered, up to 10 times.
• If you press any key or receive a call, the re-
dialling will be interrupted.
• If the redialling is successful, the phone will
beep and then you will hear a ring signal.
If you do not want to retry, press
NO
.
LAST DIALLED
L
R
046998877
