Handsfree Calling
By using the Ericsson portable or vehicle handsfree
solutions, you can be on the phone without having to
use your hands to hold it.
The SH 888 allows you to change the default settings
for the handsfree-related functions so that they fit your
own requirements.
Selecting Answering Mode
The
submenu
‘Answering
mode’
includes
two
functions: ‘Any key’ and ‘Auto’, which are useful when
you use the phone with handsfree equipment.
•
The ‘Any key’ function:
If you use the phone with handsfree equipment
and this function is turned on, you can answer an
incoming call by pressing any key, except the
NO
key.
•
The ‘Auto’ function:
If you choose the automatic answering mode, an
incoming call will be answered automatically after
one ring signal, if the phone is used with hands-
free equipment.
To select Answering Mode:
From the ‘Settings’ menu, select ‘Answering
mode’.
Choose ‘Any key’ or ‘Auto’, using the navigation
key.
To change the setting of the function you have
chosen, press
YES
.
To confirm your setting, press
YES
again.
Other Handsfree-Related Settings
Apart from the settings mentioned above, you can
change the following settings when using handsfree
equipment:
•
‘Ring level’
•
‘Ear volume’
•
‘Ring type’
•
‘Light’
Each of these settings can be specified separately when
you have your SH 888 connected to handsfree equip-
ment and when you use the phone as a handheld unit.
This means that if you make one of these settings when
the phone is connected to handsfree equipment, the
settings when it is handheld are not affected and vice
versa.
To change a setting:
Connect the phone to the handsfree equipment.
Change the setting according to the instructions
in the chapter ‘Personalizing Your Phone’.
Press
to enter the menu system. See inside the cover.
47
