background image

Sump Cleaner

5

(Standard design units are not intended to be towed. 
Special wheel designs are available at extra cost for 
units which the customer desires to tow.)
Smooth radius basket suction inlet virtually eliminates 
suction hose “chip jams”.
Float switch overfill protection virtually eliminates 
pump damage and coolant spills by automatically 
shutting down the sump cleaner’s motor when the 
tank is full.

Sump Cleaner Warranty

Eriez HydroFlow equipment warranty is defined 
in Eriez standard Terms and Conditions of Sale 
provided at the time of invoice and also available on 
www.eriez.com or by contacting Eriez. Equipment 
warranty includes all sump cleaners and is subject 
to the following exceptions and clarifications:

1.  Gasoline and LP Gas internal combustion  

engines are not covered by this warranty, but 
rather are covered by the standard warranty of 
the engine manufacturer, which varies from model 
to model. Copies of the specific warranty of the 
manufacturer will be shipped with the unit and 
such warranties and limitations are incorporated 
by reference herein. Upon request, copies of the 
engine manufacturer’s warranty will be provided  
in advance of shipment.

2.  For units mounted on mobile platforms or other 

similar sub-assemblies, such as trucks, carts, 
or self-propelled platforms, Eriez HydroFlow 
makes no warranties for such sub-assemblies 
manufactured by third parties and specifically 
disclaims any warranties with regard thereto, 
including implied warranties of merchantability  
or fitness for a particular use. The only warranties 
as to such sub-assemblies are those extended to 
purchaser directly by the third-party manufacturer, 
and such warranties are subject to all of the 
terms, conditions, and limitations of the third 
party’s warranties and are enforceable only 
against said third-party manufacturer. Eriez 
HydroFlow is not underwriting or guaranteeing 
their warranties, nor is Eriez HydroFlow an agent 
of said third-party manufacturers for purpose 
of pursuing warranty claims or making service 
arrangements or any other purpose. Copies of 
such third-party sub-assembly manufacturers’ 
specific warranty information will be shipped with 
the unit, and such warranties and limitations are 

incorporated by reference herein. Upon request, 
copies of sub-assembly manufacturers’ warranty 
information will be provided in advance of 
ordering or shipment.

3.  On all units, including Sump Cleaners and other 

sump cleaning equipment, all wheels, casters and  
batteries are considered expendable or ordinary  
maintenance items and are expressly exempted  
from this warranty and are not covered by any  
other warranty, express or implied.  
THE WARRANTIES DESCRIBED IN THE  
ABOVE PARAGRAPHS SHALL BE IN LIEU  
OF ANY OTHER  WARRANTIES, EXPRESSED 
OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO ANY IMPLIED WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE. ERIEZ HydroFlow 
SHALL NOT, IN ANY EVENT, BE LIABLE FOR 
INCIDENTAL OR CONSQUENTIAL DAMAGES; 
AND TOTAL LIABILITY OF ERIEZ HydroFlow 
SHALL NOT EXCEED THE COST OF REPAIRING 
OR REPLACING THE COVERED GOODS OR 
EQUIPMENT NOT WITHSTANDING ANY 
PROVISION OR PURCHASER’S PURCHASE 
ORDERS OR OTHER CONTRACT DOCUMENTS, 
ACCEPTANCE AND USE OF ERIEZ HYDROFLOW 
PRODUCTS BY PURCHASER CONSTITUTES 
ACCEPTANCE OF THESE LIMITATIONS OF 
ERIEZ HYDROFLOW LIABILITY AND 
WARRANTIES.

This warranty neither assumes nor authorizes any 
other person to assume for Eriez HydroFlow any 
other liability in connection with the equipment 
manufactured by Eriez HydroFlow. This warranty 
applies only within the boundaries of the United 
States of America, its territories and possessions,  
and Canada. This warranty is not assignable.
Original purchaser as used herein, shall mean only 
such person, persons, association or corporation 
which purchase the equipment hereinafter described 
for actual use.
This warranty does not apply to damage of any 
unit occurring in transit, caused by alteration by 
unauthorized persons, fire, accident, artificially 
generated electric current, acts of God, misuse or 
abuse, or any other cause whatsoever other than 
defects in factory workmanship and/or material.

 
                                                                        

Continued

 

Summary of Contents for FJ-310A





























Reviews: