4
1. Technical
specification
-
working
pressure
680
bar
- working pressure at die outlet
680 bar
- power supply
3 x 380V, 1.1 kW
-
operation
24V
- busway machining (Cu, Al) (thickness x width) max. 12 x 125 mm
2. Operation
2.1 Elements
A workshop table is a complete working station for conducting the operations of
cutting, punching holes and profiling copper and aluminium bars.
A standard table includes the following elements:
1. Cutter for cutting bars HC-120 (1)
1 pc
2. Punching and profiling segment (2)
1 pc
- punching holes for screws from M6 to M20
6 sets (dies and punches)
- punching oval holes for screws from M6 to M16
5 sets (dies and punches)
- Profiling – range from 0 to 90
˚
1 set (pins and profiling insertion)
3. External die terminal (3) 1 pc (terminate in a fast terminal
PM type)
Equipment that could be additionally connected:
-
Die GU 120 – terminal clamps at conductors 10-120 mm
2
, reshaping sector wires
-
Die GU 300 – terminal clamps at conductors 150 – 300 mm
2
, reshaping sector
wires
-
Die GO 300 – terminal clamps at conductors 6 – 300 mm
2
, reshaping sector
wires
-
Die GU 625 – terminal clamps at conductors 300 – 625 mm
2
-
Die GW – punching holes in cubicles walls
-
Die GC 50 N, GC 100 – cutting wires and conductors
-
Trimmer GL-6 – cutting assembly bars
-
Conductor-rail type GP horizontal bending machine
ERKO company reserves the right to technical changes improving/modernizing its products.
