ERM Neoverse N1 Technical Reference Manual Download

Page: 65 / 241

config.txt

file

Generic configuration file for all motherboards. This file applies to all Arm development boards
including the N1 board.

LICENSES

directory

Contains one license text file.

directory

Contains one or more HBI subdirectories for board variants. The subdirectory names match the
HBI codes for the board variants.

HBI0316?

subdirectories

Contain pointer files that define BIOS images for the MCC, the

Power Management IC

(PMIC),

and the IOFPGA, SCP, and MCP. Other files contain image, and configuration information for
the board and IOFPGA.

SOFTWARE

directory

Contains application files for the SCP and MCP. The

images.txt

file defines the image files.

3.3.2

config.txt

board configuration file

You can connect a workstation to the DBG USB port to update the generic Arm development board
configuration file

config.txt

in the root directory of the microsSD card.

The following example shows a typical

config.txt

configuration file in the root directory of the

configuration microSD card.

Note

• Colons (:) indicate the end of commands and must be separated by a space character (

0x20

) from the

value fields.

• Semicolons (;) indicate comments.

BOARD: HBI0316A

TITLE: N1SDP Configuration file

[CONFIGURATION]

TESTMENU: FALSE

AUTORUN: TRUE ;Auto Run from power on

AUTORUNDELAY: 3 ;Delay in seconds to wait for key press to stop

RTC: TRUE ;TRUE = Enable RTC, FALSE = Disable RTC

APUART0: 6 ;0-Not Used 1-USBPORT1 2-UART0 3-USBPORT2 4-UART1 5-PCC_UART5 6-

USBPORT4 7-UART3

MCCUART: 1 ;0-Not Used 1-USBPORT1 2-UART0 3-USBPORT2 4-UART1

PCCUART: 1 ;0-Not Used 1-USBPORT2 2-UART1 3-UART2

SCPUART: 1 ;0-Not Used 1-USBPORT3 2-PCC_UART4

MCPUART0: 3 ;0-Not Used 1-USBPORT4 2-UART3 3-PCC_UART6

FPGAUART1: 0 ;0-Not Used 1-USBPORT3

FPGAUART2: 0 ;0-Not Used 1-USBPORT4 2-UART3

DVIMODE: VGA ;VGA/SVGA/XGA/UXGA or HD1080 (MCC sets OSCCLK5)

USERSWITCH: 10101010 ;Userswitch[7:0] in binary

CONFSWITCH: 01010101 ;Configuration Switch[7:0] in binary

USB_REMOTE: FALSE ;Selects remote command via USB !TBA

See

2.10 UARTs

on page 2-51

for information on configuring the UARTs and UART connectivity.

3.3.3

Contents of the

directory

The

directory contains a configuration

HBI????

subdirectory that matches the HBI code of the N1

board. The

HBI????

subdirectory contains files that relate to the MCC and to other components on the

N1 board, but not the N1 SoC.

The HBI subdirectory contains the following:

3 Configuration

3.3 Configuration files

101489_0000_02_en

reserved.

3-65

Non-Confidential - Beta

Summary of Contents for Neoverse N1

















































































































































































































































Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands

ERM Neoverse N1, Technical Reference Manual

Search results

Summary of Contents for Neoverse N1

Reviews:

Related manuals for Neoverse N1

Brands by name

Popular brands