Ermator S26, Operating Instructions Manual

1.  UNPACKING 

When unpacking the machine, please check that the following accessories are included: 

•

The hose with end fittings. 

•

Handle. 

•

Floor nozzle. 

If any of the above-mentioned parts are missing, please contact your local distributor or our sales 

representative. 

Assemble the front wheels using the using bolt, washer and nut that are included in the package. 

2.  SAFETY INSTRUCTIONS 

Handling 

Warning 

•

Cables damaged through crushing or splitting can be dangerous if used and should be 

replaced immediately.  Risk of personal injury.  

Warning 

•

Do not connect the machine to an unearthed socket. Risk of personal injury. 

Warning 

•

Make sure the assembly area is firm, so the dust extractor does not tip over. Risk of personal 

and material injury. 

•

Warning 

•

Risk of pinching when handling the toggle fastener. 

Warning 

•

The machine must not be used in environments where explosive gases may be present. Serious 

risk of explosion.

Service 

Warning 

•

Remove the plug from the wall socket when carrying out maintenance work. Risk of personal 

injury.  

Warning 

•

Dust can be spread when the coarse filter and the absolute filter are replaced that can be 

hazardous to health. Accordingly, the user should wear protective glasses, protective gloves, 

and a breathing mask conforming to protection class FFP3. 

Warning 

•

Do not puncture the absolute filter. Risk of dust dispersion. 

3.  FUNCTION 

The machine is designed for sucking and separating dry, non-combustible dust with an explosion 

limit value of 

>

0.1mg/m

3

. 

The motor is started by the switch. 

The switch has three positions:  

0: 

Motor off 

!

1

Revision 0