Ermator S26, Operating Instructions Manual

When the Longopac bag is ending do as follow: 
Loosen the belt holding the Longopac bag.  Start the dust extractor.  Remove the final bag and 
take of the holder.  Reload with a new Longopac bag, reassemble the Longopac to the dust 
extractor and make the first bag.  Tighten the belt end then start use the machine or turn it off.  
Use the same procedure when using single dust bag (optional). 

7.  SERVICE 
 

•

When cleaning and servicing the machine, you must switch off the machine and remove the 

plug from the socket. 

•

Avoid cleaning with a high pressure cleaner. If necessary, do not direct at the openings on the 

machine, especially the opening for cooling air. 

•

Before moving the machine from the work area, the machine must be cleaned.  

•

All other equipment must be regarded as contaminated and be treated thereafter. 

•

If possible, use a special suitable room. 

•

Proper personnel protective equipment must be used. 

•

All parts which are contaminated after service must be properly disposed of in plastic bags 

according to all regulations. 

•

If the machine has to be used for other purposes, it is extremely important that the machine is 

cleaned, to avoid the spread of hazardous dust. 

Accessories 

Part.no. 

Description 

No./machine 

1376013 

Longopac (4-pcs) 

   1 pcs 

1276008 

Bag (25-pcs), optional           1 pcs 

200900050 

Main filter  

 1 pcs 

200700070 

HEPA 13 filter 

 2 pcs 

For other spare parts, see the enclosed spare parts list. 

8.WARRANTY 

All Ermator devices and accessories have a 12-month factory warranty for material and manufacturing 

defects. The warranty extends to 36 months when returning the attached warranty slip. Do not attempt 

to repair the suction apparatus without the consent of the manufacturer.  

The warranty does not cover defects which are the result of normal wear and tear, negligence, 

defective use, unauthorised repair or the suction apparatus being connected to the incorrect voltage. 

In the event of any complaint, the suction apparatus or an agreed part of it must be returned to us or 

our authorised representative for warranty examination and for any warranty repair or replacement. 

9.  PROBLEM SOLVING 

The S26 is designed and manufactured for a severe environment and tasks, but the user must note that 

the machine must be protected from knocks and blows. Filter, seals, attachments, and connections are 

carefully adapted and selected with regard to the operator’s work environment. Therefore, the operator 

and service personnel must treat the machine with care in order to work correctly for many years. 

!

3

Revision 0

WARNING 

Before cleaning and servicing the machine, you must switch the machine off and pull out the 

plug from the outlet.