2 | Safety
Erme AG
22 / 66
Table models professional
2.9 Safety equipment on the machine
Missing or non-functioning safety equipment can result in severe injuries.
– Only operate the machine if all the safety equipment is fitted and functional.
– Prior to starting work, check whether the safety equipment is functional and
installed correctly.
– Never disable the safety equipment.
– Make sure that the safety equipment is always freely accessible.
The machine was manufactured in accordance with the legal regulations that apply
in the European Union.
The machine, however, may pose dangers if it is not operated correctly or in a
proper condition. Dangerous areas that cannot be eliminated by design are fitted
with safety equipment and, where necessary, marked by warning signs on the
machine and by corresponding safety instructions in the operating instructions.
The machine is equipped with the following safety equipment:
– Warning signs
– Fan that automatically switches on above a temperature of 34°C to protect the
machine from overheating
– Safety and pressure relief valves
– The sealing time is limited to max. 8 seconds.
– The vacuum procedure can be stopped at any time by pressing the "STOP"
button.
