Erme AG
Safety | 2
Table models professional
23 / 66
2.10 Signage on the machine
Stickers and signs can become dirty or otherwise unrecognisable over time.
– Always keep all safety, warning and operating instructions in an easily readable
condition.
– Immediately replace damaged signs or stickers.
The following symbols and signs are located on the machine. They refer to the
immediate surroundings where they are attached.
1
2
3
4
5
7
6
9
8
1 Only vacuum liquids with the
slanted insert
2 Information about the vacuum value
for various products
3 Only vacuum products at an
ambient temperature of max.
20°C
4 Type plate
5 Information about the oil used
for the vacuum pump
6 Oil level indicator (min/max)
7 Observe the instructions
8 Service interval
9 Danger due to hot surfaces
