7 | Control/operation
Erme AG
40 / 66
Table models professional
7 Control/operation
7.1 Safety instructions
WARNING
Risk of crushing!
With machines whose lid is moved pneumatically, there is a risk of
crushing between the machine and the lid when closing the lid.
4
Do not reach between the lid and machine when closing the lid.
NOTICE
Possible damage to the vacuum pump.
With an ambient temperature below +8°C, the vacuum pump may
be damaged.
4
Only operate the machine at an ambient temperature higher
than +8°C.
7.2 Requirements for the installation site
The following requirements for the installation site must be met in order to ensure
safe and smooth machine operation:
– Operate the machine on a solid level surface. The clearance to the walls and
other objects must be at least 30 cm.
– The power socket must be easily accessible so that the mains connection can be
quickly disconnected.
– The machine must not be operated or stored outside.
– When selecting the installation site, take the space requirements for the
connections into consideration.
– The machine must be installed in a well-ventilated, dry room. Direct contact
with water or vapour must be avoided.
