Erme AG
Troubleshooting | 8
Table models professional
53 / 66
8 Troubleshooting
8.1 Safety instructions
DANGER
Danger due to electrical current.
There is a risk of death when making contact with lines or
components that carry current.
4
Work on electrical equipment must only be carried out by a
qualified electrician in accordance with electrical engineering
regulations.
WARNING
Risk of burns on hot surfaces.
The sealing bar becomes very hot during operation.
4
Observe the warning signs.
4
Avoid contact with hot surfaces, or wear protective gloves.
4
Let hot components cool down before starting work.
NOTICE
Material damage due to incorrect troubleshooting.
If pending faults are ignored or not correctly rectified, it can result
in damage to the machine.
4
In case of active faults, shut down the machine.
4
Properly rectify the fault or have it rectified by appropriate
specialists.