Erme AG
Decommissioning and disposal | 11
Table models professional
65 / 66
11.2 Personnel qualifications
The unit may only be decommissioned and disposed of by personnel who
– are authorised to do so due to their training and qualifications.
– are tasked to do so by the machine operator.
11.3 Decommissioning
11.3.1 Temporary decommissioning
Proceed as follows in case the machine must be temporarily decommissioned:
1 Switch off the machine and unplug the mains plug.
2 Disconnect the machine from the compressed air.
3 If the machine must be decommissioned for a longer period of time, take anti-
corrosion measures and regularly check the anti-corrosion agent.
11.3.2 Final decommissioning / disassembly
1 Perform the work steps set out in the "Temporary decommissioning" section.
2 Disconnect the machine from any external power supplies.
3 Remove all connection hoses/pipes.
4 Properly dispose of material, components, lubricating and auxiliary materials.
11.4 Disposal
Perform the following steps to ensure proper disposal after disassembly:
– Separate metals and plastics and take them to authorised scrapping or recycling
facilities.
– Dispose of problematic substances that can no longer be reused, such as
lubricants and cleaning agents or electrical components, according to the local
applicable regulations.
NOTICE
Environmental damage if improperly disposed of!
Incorrect disposal may result in environmental damage.
4
Observe the manufacturer's specifications for the lubricants and
auxiliary materials to ensure environmentally-friendly disposal.
