Use and maintenance manual
Auto-Puncher for timing belts
Model: APTM-600
____________________________________________________________________________________________________________________
P a g . 7
-
Technical characteristics:
Dimensions 1487 x 1060 x 1538 (l x w x h)
Weight 314 Kg
Max. thickness 10 mm.
Voltage 1 x 230
Power 0.40 kW
Max. pressure 9 bar
Belt width 620 mm.
Advance speed 1 meter/minute
-
Using instructions:
WARNING:
HAND AND ARM TRAPPING HAZARD WITH THIS DEVICE DUE TO THE MOVEMENT OF THE
CUTTING HEAD. GREAT CARE MUST ALSO BE TAKEN BETWEEN THE CUTTING HEAD AND
SUPPORT PLATE, AS THERE IS THE DANGER OF LIMBS BEING SEVERED.
Once the machine electrical and air connections are made, proceed to start it up using the ON
switch.
Check that the regulator pressure is between 2 and 6 bar according to the cutting head installed.
Safety Systems and messages.
This punch cutter has been equipped with the following safety systems: