Use and maintenance manual
Longitudinal profile welding
Model: LRW-200
_______________________________________________________________________________________________________________________
P a g . 7
For endless belts, remove the bolt of arm and open it.
Once the belt is placed in position, close the frame using the arm and fix the bolt again to prevent
any movement or deformation caused by the pressure of the pulleys.
Start the Leister welder by pressing the black wheel located on the rear and adjust the
temperature rotating this wheel
NOTE: For perfect welding, the welder should be pre-heated until the temperature digits
will be fixed.
Introduce one end of the profile into the rear of the machine until completing one turn of the
welding pulley as shown in the photo:
