Use and maintenance manual
Skiving machine
Model: SK-270
_______________________________________________________________________________________________________________________
P a g . 4
-
Description:
Transmission belt skiving, with motor-driven abrasive roller and manual table advance with
inclination adjustment for various bevelling angles. Abrasive roller height adjustment using an
eccentric shaft.
-
Connecting to the mains supply:
The machine should be connected to a 2-phase 230V mains electricity supply, depending on the
voltage stated on the technical specifications plate, together with the corresponding earth
connection. Attention must be paid to the motor rotation direction.
-
Technical Characteristics:
•
Dimensions
592x460x445mm (L x W x H)
•
Weight
32Kg
•
Roller width
270 mm
•
Bevel travel
180 mm
•
Roller diameter
100 mm
•
Maximum thickness
8 mm
•
Revolutions
490 rpm
•
Bevel angle
from 0º to 3.5º (30 Points)
•
Motor
0.75KW 5.6Amp 2 Phases 230V
-
Usage instructions:
Once the mains supply connection has been made, it should be verified that the motor is rotating
in the correct direction, (if it does not, then the connections for two of the phases should be
reversed).
Fit the adhesive tape over the white nylon plate in the working zone, just as shown in the figure.
This operation is essential to obtaining a good finish since it will prevent stretching and breaking
during the process:
