25
Rotary key selector
Like the digital selector, the rotary key selector is an interface for communication with the control board, but has more
limited functions. This device cannot be used to configure the mechanism. These are the functions that it can be used
for:
1.- Selecting the different working modes ( there are 6 modes)
2.- Error diagnosis ( does not differentiate between error modes). To determinr the specific error connect the digital
selector. When the led blinks for one second it indicates that it is working properly; when it blinks faster there is an error.
The rotary key selector has a 6 position switch with the following working modes: automatic, door open, door close,
winter, exit and manual mode. It has also a reset button ( the button can be used to “ set up” the system if held for 5
seconds and to do a “reset” if held 1 second) .
