i-CON 1 / 14
3BA00180 • 8.04.008 • Rev. 1
Operating instructions
6. Functional description
6.1
Operation
The soldering station is switched on and off by the mains switch on the front side
a
.
The soldering station is controlled via a rotary encoder
b
with pushbutton function.
It is called i-OP. The i-OP makes it possible to select desired functions or to change
values. Clockwise turning results in higher values and counter-clockwise turning
in lower values. Slow turning effects change in increments of one. Quick turning
changes the selected values in increments of 10/50/100 (depending on the corre-
sponding parameter).
The i-OP has an additional pushbutton function. Via this pushbutton function (push-
ing), the selected parameters and values are confirmed and become effective for
the station. All setting steps and measured values are displayed in plain text in a
clearly structured display window, which is simply referred to as “Display”.
0
_
ON
0
_
ON
