i-CON 1 / 4
3BA00180 • 8.04.008 • Rev. 1
Operating instructions
1. Introduction
We appreciate your decision to purchase this high-quality soldering station. The i-
CON 1 from ERSA is a top-of-the-line micro- processor-controlled soldering station.
It is designed for use in industrial production, repairs and in laboratories.
1.1
Supply unit
The use of a microprocessor facilitates operation and sets new standards for the
functions available at the soldering station. Five independent tool settings can be
made and saved for the connected tool by means of a simple menu guide. With the
i-Set Tool (option) it is possible to save these settings. Also you can write back the
saved settings into the soldering station. This way, the basic settings can be trans-
ferred quickly to several soldering stations.
The i-CON 1 was developed for operation of the i-Tool soldering tool. With its vast
variety of functions, the high speed and regulating accuracy this soldering station is
most suitable for use in manufacturing processed with high quality requirements.
The soldering station can optionally be delivered with a serial PC-interface. Control
signals for the soldering smoke extraction EA110 are also available on this interface.
