i-CON 1 / 9
3BA00180 • 8.04.008 • Rev. 1
Operating instructions
Attention!
Never leave your hot heating tool unattended. Remember
that the tool insert needs a certain amount of time to cool down to a
safe temperature even after you have switched the device off.
Caution!
Keep your workplace tidy. An untidy workplace increases
the risk of accidents.
Attention!
Lead alloyed solders are toxic. Solders containing lead are
toxic if they enter human body. For this reason, it is strictly forbidden
to eat, drink or smoke. By equal measure, you should thoroughly wash
your hands after working with lead alloyed solder.
Attention!
Dispose of waste solder in a responsible fashion. Comply
with your local authority’s waste disposal regulations when disposing
of the by-products of your soldering work.
Attention!
Ventilation and extraction. The materials and ancillary sub-
stances you use whilst soldering can have a detrimental effect on your
health. Make sure there is adequate ventilation or extraction. Comply
with the relevant safety data sheets.