12
__________________MOUNTING INSTRUCTIONS_____________
After the initial set-up assembly is completed use the following procedure to mount the snowblower to the
loader for user operation.
1. Use the step, treads, and grab handles to
get on and off the loader and snowblower.
2.
Sitting in the operator’s seat, lower seat bar
and fasten the seat belt.
3. Drive the loader to the rear of the
snowblower. Put the loader quick attach
coupler into the snowblower mounting
bracket.
4. Tilt the loader coupler backward a small
amount until it is fully engaged in the snow
blower mounting bracket.
5. Stop the engine and engage the parking
brake.
6. Secure the coupler locking mechanism that
attaches the snow blower to the loader.
Coupler wedges or pins
must extend through the holes in
attachment. Levers must be fully down
and locked. Failure to secure wedges or
pins can allow attachment to come off
and could cause injury or death.
Summary of Contents for 2020 Series
