13
____________________MOUNTING INSTRUCTIONS________________
7. Connect the hydraulic quick couplers from
the snowblower to the loader.
IMPORTANT:
Make sure the quick couplers
are fully engaged. If the quick couplers do
not fully engage, check to see that the
couplers are the same size and brand. Do
not force the quick couplers together.
IMPORTANT:
Wipe the ends of the hydraulic
quick couplers (both lead and loader) with a
rag to remove any possible contamination.
Contamination
can
cause
hydraulic
components to fail and is not covered under
warranty.
NOTE:
Attachment is shipped with 12FJX
(1-
1/16” Female JIC Swivel) fittings on the
ends of the lead hoses.
NOTE:
Make sure the pressurized hose is
routed to the “P” port of the valve block. If it
isn’t, the blower will not operate properly.
NOTE:
The pressure line on the snowblower
has a RED cable tie on the hose end.
See loader’s operator’s manual for details on
identifying the correct pressurized hydraulic
coupler.
If you are operating the loader controls
correctly and the snowblower still does not
work, try switching the hydraulic couplers
around on the snowblower lead hoses. This
will effectively reverse the flow to the motor.
Summary of Contents for 2020 Series
