8
Discharge Chute Installation
1. Remove one of the roller guides from the
blower housing by removing the bolt securing
the roller guide.
2. After unpacking the chute, slip the chute into
the grooves on the two remaining roller guides.
3. Reinstall the roller guide and bushing with the
bolt and lock nut.
IMPORTANT:
Tighten lock nut to 75 ft-lbs.
4. Rotate the chute to the straight forward
position.
5. Remove the chain shield.
6. Loosen the chute rotation motor bolts. Push
the motor all the way towards the chute.
Install the No. 40 roller chain around the
sprocket.
7. Tighten the chute chain by pulling the motor
outward to remove all slack. Tighten the
motor bolts and install the chain shield.
Do not operate the
snowblower without the chain shield in
place. Moving parts may cause injury or
death. Always replace guard after
servicing.
____________________SET UP ASSEMBLY ___________________
Summary of Contents for 2020 Series
