3
The user is responsible for inspecting the machine
daily, and for having parts repaired or replaced
when continued use of the machine would cause
damage, excessive wear to other parts or make the
machine unsafe for continued operation.
If an operating procedure, tool device, maintenance
or work method not specifically recommended is
used, you must satisfy yourself that it is safe for you
and others. You must also ensure that the
attachment will not be damaged or made unsafe by
the procedures you choose.
Erskine Attachments LLC cannot anticipate every
possible circumstance that might involve potential
hazard. The safety messages found in this manual
and on the machine are therefore not all inclusive.
The signal words
CAUTION, WARNING,
or
DANGER
are used to indicate hazards.
Indicates
a
potentially
hazardous situation which, if not avoided,
may result in minor or moderate injury.
Indicates
a
potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates
a
potentially
hazardous situation which, if not avoided,
will result in death or serious injury.
The word
IMPORTANT
is used in the text when
immediate damage will occur due to improper
technique or operation.
The word
NOTE
is used to convey information that
is out of context with the manual text; special
information such as specifications, techniques,
reference information, and other information of a
supplementary nature.
SAFETY
DO NOT use or perform maintenance on this machine until this manual has
been read and understood. In addition, read the Operation and Maintenance
Manual(s) pertaining to the attachment and the attachment carrier (“Loader”).
