Page 25
Notice G05 - 3 590 503
Issue: 11/2011 - Rev.A
ERVOR (SCA) - 6, Rue Désiré Granet - Z.I. du Val d'Argent - 95100 ARGENTEUIL FRANCE
(33) 01 34 11 50 00
(33) 01 34 11 50 10
Web : www.ervor.com - Email : info@ervor.com
10 - F - EVERY 2000 HOURS
)
Change intake and compression valves.
)
Grind cylinder head if necessary.
10 - G - EVERY 3000 HOURS
)
Change cooling coil assembly and shock absorber
)
Change coupling blades
)
Change oil plug and oil discharge plug with gaskets
10 - H - EVERY 4000 HOURS
)
Check connecting rods.
)
Check pistons, pistons-ring, and cylinders.
)
Change cylinder head LP/HP (with valves)
10 - I - TIGHTENING TORQUE
TIGHTENING TORQUE in daN.m
- CYLINDER HEAD ...................................................... 2.4
- CYLINDER ................................................................ 2.4
- OIL PIPE.................................................................... 1
- INTAKE PIPE ............................................................. 1
- BEARING .................................................................. 2.4
- VALVE ....................................................................... 2.4 (Ø30)
- COUPLING ................................................................ 4.7
