3. Functions
Push buttons
All the functions of the Chronograph are controlled through 2 push buttons.
Push button 1 has two functions: Start und Stop
Push button 2 has the function: Reset
Function: Start
When you need to measure a specific event you must remember to reset the
chronograph hands.
If the measuring period is initiated you have to push the button 1 - Start.
The seconds counter hand in the centre is moving forward.
Function: Stop
When the timed event is over you once again push the button 1. The
chronograph hands stop, you can read the result. The seconds can be read
out at the centre, the minutes at the "3-o´clock" position and the hours at the
"6-o´clock" position.
Function: Reset
The chronograph hands have to be returned to the starting position, by
pushing the button 2. The reset can be done only when the Chronograph is
stopped.
A measurement can have the maximum length of 12 hours.
