10.2 Maxtemp error
The maxtemp error occurs when at least one of the temperature
readouts of the hotend or the heated bed more than the limit values.
Check if the thermistor cable is not damaged and look for any
overtightened zip-ties around the cables leading to the electronics
board.
10.3 Thermal runaway
This error occurs when the temperature of he hotend or heated bed
can’t be raise to the correct temperature and has been heating for a
long period. The firmware protect feature will activate and error will
appear on the LCD.
1) You can add the silicone sock to the heated block
2) You need to check your cable is tight and not damaged.
22