Cleaning:
Step 1. Depressurize the Cup (g960001) and disconnected the house.
Step 2. Remove the Cover Assembly from the Cup as Described in OPERATION.
Step 3. Empty the paint or coating from the Cup.Dipose of properly.
Step 4. Pour a small amount of clean solvent ( as Specified by the paint
manufacturer) in the Cup. See Saftey Warnings and Caustions #5.
Step 5. Place the Cover Assembly into the Cup and tighten until the assembly is
sealed.
Step 6. Reconnect the air hose to the Regulator and pressurize the cup.
Step 7. Clean the Air Paint Sprayer by Shaking continuously and spraying the solvent
though the gun.
Step 8. Repeat steps 1 through 7 until the sprayed solvent appears clean and clear.
Step 9. After depressurizing disconnect the regulator from the air supply.
Step 10.Remove the Cover Assembly From the Cup and dispose of the surplus
solvent.
Step 11. Wipe the Cup clean with a dry, lint-free cloth.
Warning:
Always dispose of paints, coating and other chemicals in a proper and
responsible fashion. If you have questions regarding the propper disposal of any
chemical, contact the chemical manufacturer for instructions.
Caution:
For thorough cleaning, the CUP may be fully immersed in solvent. DO
NOT LEAVE SOLVENT FOR MORE THAN 24HOURS as damage may occur.
NEVER IMMERSE THE AIR PAINT SPRAYER IN SOLVENT. When cleaning,
brush solvent onto extiorior parts only.
