Lubrication:
Before and after each use of a G960-2L, perform the following lubrication process,
using a non-silicon, spray gun lubricant:
Step 1. Put 2 or 3 drops of lubircant on the Part of NK, infront of the
Trigger(g960015). Tip the gun backward and allow the lubricant to drip into the front
of the gun housing.
Step 2. Put 2 or 3 drops of lubircant on the Air Valve (g960024). Tip the gun
backward and allow the lubricant to drip into the front of the gun housing.
Step 3. Put 2 or 3 drops of lubircant on the Fan Adjuster(g960014). Tip the gun
backward and allow the lubricant to drip into the front of the gun housing.
Step 4. Put 1 drops of lubercant on the Trigger Stud (g960016) and another on the
Trigger Screw (g960017). Work the Trigger to allow the lubricant to coat the parts.
Step 6. Put 1 drops of lubercant on the regulator Adjusting Cap(g960009). Tip it
sideways and allow the lubricant to drip into the Air Cap.
Step 1
Step 4
Step 5
Step 2
Figure 8 - Lubricating the G960-2L
Step 3
