background image

- 28 -

EN

1C29

SEARCH

Make sure ...

The unit must be turned on.

Insert a tape.

This function allows you to search easily a beginning point
that you want to review by rewinding or fast forwarding.

NOTE:

Zero Return 

WILL NOT

work on a blank tape or a

blank portion of a tape.

1

Stop a tape at your desired point

Rewind or fast forward the tape to the beginning
point at which you want to review.

2

Reset the counter to 0:00:00

Press the C.RESET button repeatedly.

3

Begin recording or playback

Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.

4

To activate “ZERO RETURN” mode

Press the SETUP button on the
remote control.
Press the Arrow button 

K

or 

L

to

point to “ZERO RETURN”.
Then press the ENTER button.
The counter will appear on the TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.

TV/VCR

ZERO RETURN

The Time Search function makes it possible to quick-
ly advance the tape to your desired position simply
by entering the exact amount of playback time you
want to skip.

NOTES:

Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.

This function will not operate in recording mode.

This function is not operative when a cassette tape
is not inserted in the unit.

In the example below:

To watch a program before/

after 2 hour 50 minutes from the present position, in
either direction.

1

Insert a tape

2

Select “TIME SEARCH” mode

Press the SETUP button on the
remote control. 
Press the Arrow button 

K

or 

L

to

point to “TIME SEARCH”.
Then press the ENTER button.

3

Enter your desired time

Press the Arrow button 

K

or 

L

until

your desired time appears.
(Example: “2:50” stands for 2 hours
50 minutes)
If you wish to cancel the Time
Search at this point, press the SETUP button on the
remote control.

4

Begin Time  Search

By pressing the Arrow button 

s

or 

B

, the unit will

rewind or fast forward to the specified point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.

TO CANCEL THE TIME SEARCH at this
point

Press the STOP/EJECT button on the unit or the
STOP button on the remote control. This will delete
the selected time.

TV/VCR

- TV/VCR SETUP -

TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE  [ENGLISH]
CAPTION  [OFF]

B

ZERO RETURN
TIME SEARCH
INDEX SEARCH

- TV/VCR SETUP -

TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE  [ENGLISH]
CAPTION  [OFF]
ZERO RETURN

B

TIME SEARCH
INDEX SEARCH

TIME SEARCH

2 : 50

PICTURE SEARCH

This feature is very useful in finding or skipping over a par-
ticular scene on a tape. In this mode, the sound will be muted.
1)You may view a video tape at a high speed in either a forward

or reverse direction by pressing the F.FWD 

g

or REW

h

button during playback. (in the SP / LP / SLP modes)

NOTE:

If you press the F.FWD 

g

or REW

h

button

on the front panel in the DVD mode, the VCR for-
ward or reverse will start. Please press the STOP /
EJECT button once to stop it, twice to eject it.

2)Press it again and the unit will now search in super

high speed. (in the LP / SLP modes only)

NOTE:

• 

Tapes recorded in the SP or LP mode will dis-
play a noise bar on the TV screen and the picture
may revert to Black and White. This is normal.

3)Press the PLAY button to return to normal speed.

TV/VCR

TIME SEARCH

Summary of Contents for EC720E

























































Reviews: