background image

- 30 -

EN

1C29

RECORDING

Make sure ...

The unit must be turned on.

Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)

NOTES:

This unit will ONLY record and view the same channel.

This unit cannot record the contents from the built-in DVD.

You can ONLY watch the same TV program that is
being recorded.

1

Select the channel to be recorded

Press the number buttons on the
remote control or the CHANNEL
button 

K

or 

L

.

Remember:

If the unit is connected

to a cable box or satellite box, the
unit must be on CH3 or CH4, then
the channel to be recorded must be selected on the
cable box or satellite box.

2

Select the tape speed

Press the SPEED button to select
the desired tape speed (SP/ SLP).

3

Begin recording

Press the RECORD button.

4

Stop recording

Press the STOP button when recording is completed.

TV/VCR

NORMAL RECORDING

Press the PAUSE button to tem-
porarily stop recording. 
Press the PAUSE or RECORD but-
ton to resume recording.

NOTES:

After 5 minutes, the unit will
automatically switch to the Recording mode to pre-
vent tape damage.

If “CLOSED CAPTION (ON)” is selected, the On-
Screen Display will appear for 5 seconds, then dis-
appear.

TV/VCR

SKIPPING UNWANTED 

SCENES DURING RECORDING

CH 10

SP

REC

SP

PAUSE

SP

Summary of Contents for EC720E

























































Reviews: