background image

– 37 –

EN

01A11

PLAYING A DISC

BASIC PLAYBACK

Getting started

¡

Turn on the power of amplifier and any other com-
ponents, if necessary. 

1   

Press the POWER button.

¡

The power will turn on.

2   

Press the OPEN/CLOSE button to open disc
loading tray.

3   

Place the chosen disc in the tray, with the
label facing up.

MP3

CD

DVD-V

4   

Press the PLAY button.

¡

The tray will close automatically and playback will
then start from the first chapter or track of the disc.
If the playback does not start automatically, press
the PLAY button.

¡

When you playback a DVD which features a title
menu, it may appear on the screen. In this case, refer
to “TITLE MENU”.

5   

Press the STOP button to stop playback.

NOTES

¡

When the DVD mode has been switched to the
TV/VCR mode, the DVD mode shuts down first and
then the TV picture and sound appears in about 4 sec-
onds. Similarly, when the POWER button is pressed to
turn off in the DVD mode, this mode shuts down first
and then the power is turned off.

¡

A “prohibited icon” may appear at
the top-right on the TV screen dur-
ing operation, warning that a pro-
hibited operation has been encoun-
tered by the DVD or the disc.

¡

With DVDs that use titles for playback program sig-
nals, playback may start from the second title or it
may skip these titles.

¡

During the playback of a two layered disc, pictures
may stop for a moment. This happens when the 1st
layer switches to the 2nd layer. This is not a mal-
function.

GENERAL FEATURES

DVD may contain menus to navigate the disc and
access special features. Press the appropriate number
buttons or use the Arrow button (

K

/

L

/

s

/

B

) to high-

light your selection in the DVD main menu and press
the ENTER button to confirm.

NOTES

¡

Select DVD mode by pressing the SELECT button on

the remote control. Then operate the DVD functions.

¡

Unless stated, all operations described are based on
remote control use. Some operations can be carried
out using the menu bar on the TV screen.

DVD-V

TITLE MENU

1   

Press the TITLE button.

¡

The title menu will appear.

2   

If the feature is not available,

symbol

may appear on the TV screen.

3   

Press the Arrow button (

/

L

/

s

/

B

) to select

an item and the ENTER button to confirm
selection.

DVD-V

DISC MENU

1   

Press the DISC MENU button.

¡

The DVD main menu will appear.

2   

If the feature is not available,

symbol

may appear on the TV screen.

3   

If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title
and other options will appear for selection.

4   

Press the Arrow button (

/

L

/

s

/

B

) to select

an item and the ENTER button to confirm
selection.

DVD-V

CALLING UP A MENU SCREEN
DURING PLAYBACK

¡

Press the DISC MENU button to call up the DVD menu.

¡

Press the TITLE button to call up the title menu.

NOTE

¡

Contents of menus and corresponding menu opera-
tions may vary between discs. Refer to the manual
accompanying the disc for details.

Summary of Contents for EC720E

























































Reviews: