5.1 Filter installation and replacement
1
Open and remove the filter cover
2
The filter cover is released.
3
Remove the used filter by depressing
the filter latch and lifting it out from
cover.
4
Remove the pre-filter.
5
Clean the spark arrestor if necessary
6
Install a new filter by reversing the ac
-
tions in steps 3 and 4
If the filter is wet or heavily loaded with particles or damaged, it
should be replaced. Never attempt to clean the filter by any means, it can
damage the filter media easily. The pre-filter should be intact without any
tears or cuts. Please replace the pre-filter if it becomes wet or heavily loaded
with particulate.
