ESAB OrigoMag C140, Instruction Manual

−

 9 

−

OC140e

6.1

Connection and control devices

1

Welding voltage switch

OFF + 4 steps (mains ON/OFF)

4

Return cable with clamp, fixed

2

Orange indicating lamp, overheating

5

Knob for wire speed setting

3

Welding gun, fixed

6.2

Functions explanation

6.2.1

Overheating protection

If the internal temperature becomes too high, the welding is interrupted and disabled.

This state is indicated by lighting of the orange indicating lamp [2] on the front of the ma-

chine. It resets automatically when the temperature has fallen.

7

MAINTENANCE

Regular maintenance is important for safe, reliable operation.

Note!
All guarantee undertakings from the supplier cease to apply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any
faults.

7.1

Inspection and cleaning

Check regularly that the power source is free from dirt.
The power source should be regularly blown clean using dry compressed air at reduced

pressure. More frequently in dirty environments. Otherwise the air inlet/outlet may be-

come blocked and cause overheating.

GB