© ESAB AB 2011
- 13 -
bp16ea
5.2
Control devices
1
Power switch ON/OFF
4
Torch trigger/ Gas test trigger
2
Output current control
5
Pressure regulator
3
Display
Power switch - (1)
Turn the knob clockwise to “ON” position for normal operation. Turn the knob
counterclockwise to switch “OFF”.
Output current control - (2)
Adjustable from 20 to 90 A. For settings see cut data charts in the torch manual.
Display - (3)
Shows current settings during normal operation. When the unit is initially switched
on, the software version will be briefly displayed.
When the unit is in the “GAS TEST” mode, the display will indicate the air pressure
setting in bar. The setting can be switched to psi by a service technician.
Should a fault condition exist in the normal operation, the display will show a code
number, see chapter
7.1
.
GB