© ESAB AB 2011
- 6 -
bp16ea
Dispose of electronic equipment at the recycling facility!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical and/or
electronic equipment that has reached the end of its life must be disposed of at a
recycling facility.
As the person responsible for the equipment, it is your responsibility to obtain
information on approved collection stations.
For further information contact the nearest ESAB dealer.
ESAB can provide you with all necessary cutting protection and accessories.
2
INTRODUCTION
The plasma power source
Powercut 1300/1600
and the plasma cutting torch
PT-38
are a complete and safe plasma cutting system
for manual cutting and gouging. It
delivers cutting power for severing materials up to 45 mm thickness.
ESAB's accessories for the product can be found on page
23
.
2.1
Equipment
The power source is supplied with:
S
mains cable, 3 m
S
instruction manual
S
return cable incl clamp
S
plasma cutting torch, 7.5 m, supplied according to the denomination on page
22
.
3
TECHNICAL DATA
Powercut 1300
Powercut 1600
Mains voltage
3
400 V
$
10 % 50/60 Hz
3
400 V
$
10 % 50/60 Hz
Mains supply
Ssc min. 4.0 MVA
Zmax. 0.04
Ssc min. 4.0 MVA
Zmax. 0.04
Setting range
20
– 70
A
20
– 90
A
Permitted load
60 % duty cycle
100 % duty cycle
90 A / 115 V
70 A / 115 V
90 A / 115 V
70 A / 115 V
Efficiency
at maximum current
89 %
89 %
Open-circuit voltage
U
0
208 V
280 V
Operating temperature
–
10 to 40 °C
–
10 to 40 °C
Transportation temperature
–
20 to 55 °C
–
20 to 55 °C
Sound pressure at no load
< 70 db (A)
< 70 db (A)
Dimensions, l x w x h
706 x 322 x 379 mm
706 x 322 x 379 mm
Weight
41 kg
41 kg
Insulation class
transformer
H
H
Enclosure class
IP 23
IP 23
GB