background image

DS200 Troubleshooting Guide

Anoka County Elections

NOTE:  

For all ballot counter problems, be sure to open the auxiliary

compartment so that voting can continue without interruption.

TABLE OF CONTENTS

...

DS200 POWER ISSUES

o.

DS200 won

t turn on when screen is lifted ........................................................................... page 2

...

PRINTING PROBLEMS

o.

Machine starts up, but stops prior to printing zero tape ...................................................... page 3

o.

Machine is printing, tape is feeding, but no text shows ....................................................... page 3

o.

Machine is printing, but nothing is coming out .................................................................... page 4

o.

Machine is printing, tape is folded, mangled or feeding sideways ....................................... page 4

o.

Machine screen is frozen, will not allow selections to be made............................................page 5

o.

AutoMARK machine has print error message on the screen................................................. page 5

...

BALLOT FEED ISSUES

o.

First ballot of the day will not go into the ballot counter ..................................................... page 6

o.

Ballots will not feed into the ballot counter ......................................................................... page 6

o.

Jammed Ballot

 Error Message Displays ............................................................................. page 7

...

PUBLIC COUNTER ISSUES

o.

Public counter is not at zero at the start of the day ..............................................................page 7

...

MODEM ISSUES

o.

Closed Polls but won

t modem immediately......................................................................... page 9

o.

Modem Transmission Fails.....................................................................................................page 9

o.

Modem Transmission Troubleshooting Unsuccessful......................................................... page 11

Summary of Contents for DS200














Reviews: