User Manual
10
Cleaning & Care
CAUTION:
Ensure the appliance is off and has cooled down
before cleaning.
TRIVETS
Persistent stains may require rubbing with a
nylon scourer or creamed powder cleansers.
Household enamel cleaners are available, follow
the manufacturer’s instructions in their use.
Harsh abrasive cleaners, powder cleaners,
steel wool or wax polishes should not be used.
STAINLESS STEEL HOB
The stainless steel hob may discolour over
time. This is normal due to the high cooking
temperatures. Each time the cooktop is used, it
should be clean with a product that is safe and
suitable for stainless steel, such as a soft cloth or
sponge with detergent and warm water.
CAUTION:
Try to clean up and remove spillages
immediately, while the hob is still hot! Especially
sugar and foods with a high sugar content
(eg. jam), melted plastics and foil, all of which
can damage the hob if left. Dry the the surface
thoroughly after cleaning.
If the hob requires extensive cleaning:
• Use a hob cleaner product after there has been
sufficient time allowed for the hob to cool.
Shake the bottle and apply a small quantity of
cleaner directly onto the hob.
Rub clean using a damp cloth or paper towels.
• Use a damp cloth to remove all remaining
traces of the cleaner, which could otherwise
burn on when the hob is next used. Wipe the
hob dry.
TRIVETS AND BURNERS
These can all be lifted off and removed for
separate cleaning.
CAUTION:
When refitting the burners, ensure
that they are correctly seated.
Ensure burners are thoroughly dried after cleaning
or spillage. When cleaning the burners, ensure
that all the flame ports are free of any blockage
(refer to Figure 2B on page 6). If necessary, use
a toothpick or brush to clear ports. The outer
surface of the burner caps have a polished
finish and extra care needs to be taken to avoid
scratching this surface during cleaning. In
instances of heavy soiling, it may be necessary to
apply a non-abrasive cleaning compound and rub
with a cloth until the soiling is removed and then
finish with a soft, dry cloth.
WARNING:
NEVER place trivets or burners in the dishwasher.
IGNITION SPARK PLUG &
FLAME SAFEGUARD SENSOR
Gently clean the ignition spark plug and flame
safeguard sensor with a damp cloth to avoid
lighting difficulties. Ensure that they are dry
before use.
INJECTOR
Ensure the injector remains free of any foreign
material. If necessary, use a thin piece of wire to
clear the orifice.
