esatto.house
25
Maintenance and Cleaning (Continued)
INTERNAL CARE CONTINUED
Step 2
With the filter assembly removed from the dishwasher, the fine filter can be pulled off the bottom of the filter
assembly (refer to figure 25 below). This fine filter is covered by a fine mesh. Rinse this under running water from your
tap and wipe any residual food residue off the filter.
Figure 25- The filter assembly once removed from the dishwasher cabinet base.
Step 3
Detach the course filter by gently squeezing the tabs at the top and pulling it away from the mesh main filter.
Under running tap water, clean both the mesh main filter and the course filter, removing any residual food or foreign
objects. For a more thorough clean you may like to use a soft cleaning brush (i.e. a soft bristtled toothbrush).
Figure 26- Rinsing and scrubbing any residual food particles or foreign objects from the filter components.
Step 4
Before re-fitting the filter housing into your dishwasher, it’s worth checking that the housing in the base of the
dishwasher is clean and clear of foreign objects (including bone fragments, broken glass, etc).
Caution!
We recommend wearing gloves to protect your hands from any potential broken glass or sharp foreign objects
that may be sitting in the base of the filter housing.
Step 5
Reassemble the filter in the reverse order of disassembly. Replace the filter into the base of the dishwasher and
turn the coarse filter head in a clockwise direction until it locks back into place. You will notice the arrows to align on
the course filter and the metal main filter when locked in position.
Figure 27- Refitting the filter system into the base of the dishwasher.
