ESB Tanning Systems
Caring For and Maintaining Your Tanning Bed
THE TANNING BED SHOULD BE COMPLETELY SHUT DOWN AND
UNPLUGGED FROM POWER SOURCE AT LEAST TWO (2) FULL HOURS
BEFORE ANY CLEANING OR MAINTENANCE TO ALLOW THE TANNING
BED TO ADEQUATELY COOL
DOWN!!!!
Cleaning and Acrylic Maintenance
IT IS NECESSARY TO THOROUGHLY CLEAN AND SANITIZE YOUR
ACRYLIC AFTER EVERY USE TO ENSURE CAREFREE OPERATION AND
TO MAXIMIZE ITS TANNING EFFICIENCY. THE ACRYLIC SHOULD BE
CLEANED WITH A NON-ABRASIVE DISINFECTANT THAT DOES NOT
CONTAIN AMMONIA AND/OR ALCOHOL. DO NOT USE COMMERCIAL
CLEANERS SUCH AS WINDEX
OR 409
.
USE OF AMMONIA AND/OR ALCOHOL ON YOUR ACRYLICS
WILL VOID THE WARRANTY!
Take the following steps to maintain your acrylic:
When cleaning the tanning bed, use a cotton towel which is much less abrasive than
a paper towel. Never wipe with a dry cloth, as this will generate a slight static,
which attracts dust.