ESB Tanning Systems
Location Requirements
Make sure the room is well ventilated. Air from the room is used to cool your tanning
bed, which helps to ensure years of trouble free performance. Poor ventilation may
cause the unit to overheat and cause discomfort to the user as well. If any of the cooling
fans malfunction, turn off the tanning bed immediately, and do not use it again until it
has been serviced. Place your tanning bed no closer than one foot from any wall. Be
sure that curtains, drapes, and other room furniture is not obstructing the airflow into the
end caps of the bed or out of the fan openings.
Unpacking Instructions
Your tanning bed comes in two cardboard cartons, one for the bench, and one for
the canopy.
Remove the bench and canopy from the
boxes
. The canopy box contains:
the canopy unit, pedestal (Avalon
and
Grande
models only.) The bench box contains:
bench unit, users manual, pillow, and a hardware kit box containing legs, arms, safety
goggles and assembly hardware. Inspect the items, including canopy and bench, for any
visible damage. Report any such damage to your ESB Authorized Dealer immediately.
Assembly Instructions
(Proper assembly of your tanning bed requires two people.)
Tools required –
Assembling the tanning bed requires a ½ inch wrench
Parts List
Item
Description
Quantity
A
Left Arm
1
B
Right Arm
1
C
Bench Leg
2
D
Gas Shocks
2
E
5/16 x 1 ½ Allen Bolt
4
I
Allen Wrench
1
K
Pedestal
3