©
202 0 Escalad e Sports
Fo r Custome r Servic e Cal l 1-888-996-2729
6
All Rights Reserved.
PARTS REQUIRED
1pc -
P1
Side Apron
1pc -
P2A
End Apron
1pc -
P2B
End Apron with Logo Emblem
4pcs -
H4
Flat Washer
4pcs -
H3
Allen Head Bolt
4pcs -
H9
M8 Lock Washer
P2B
P2A
P1
H4
H4
H9
H9
H3
H3
STEP 1
Attach
P1
Side Apron onto the
P2A
End Apron and
P2B
End Apron with Logo Emblem using the
H4
Flat Washers,
H9
Lock Washers and
H3
Allen Head Bolts as shown in
FIGURE 1.
Do not tighten bolts, snug tighten only.
PARTS REQUIRED
1pc -
P3
Playfield
1pc -
STEP 1
Assembly
STEP 2
With the help of another adult, slide the
P3
Playfield with the graphic facing down into
the grooves of both
P2A
End Apron,
P2B
End
Apron with
Logo Emblem
and the
P1
Side
Apron as shown in
FIGURE 2.
FIGURE 1
FIGURE 2
All grooves must be aligned
with each other.
Keep Parts Flush.
Keep Parts Flush.
P2A
P2B
P3
P1
NOTE:
Make sure the P3 Playfield is properly
seated into all 3 grooves.
NOTE:
This assembly is upside down.
THIS STEP REQUIRES TWO OR MORE ADULTS.
IMPORTANT NOTE:
grphic facing down
