14
EScale Samurai - Instruction Manual
41. Locate the canopy, canopy wire and
fi breglass cloth.
The wire will be used to hold the front of the
canopy in place..
Hold the wire in place and completely soak
the fi breglass cloth using thick CA.
Set aside to completely cure, overnight if
possible.
42. Attach the matching small piece of velcro
to the canopy to match the postion on the
fuselage.
43
Secure the motor in the nose of the fuselage.
Position the motor so the motor wires run
inside the base of the fuselage.
Use medium strength thread locking
compound (blue) on the screws to prevent
them coming loose.
Attach the propeller blades and spinner.
44. TIP: When setting up the glider on your radio,
it is a good idea to remove the blades so
there are no nasty surprises!.
CANOPY, MOTOR, FOLDING PROP & SPINNER
