How to recall saved Nutritional data:
1) Make sure your scale is in WT mode (press “g/oz” key if
necessary), “WT” will display
2) Press the MR key. The display will show “
Σ
M” followed by the
total memory number
3) Total Nutritional data will show on the display
4) Press zero to go back to WT mode
How to clear saved data:
1) Make sure your scale is in WT mode, and the food code is 000
(press “g/oz” key if necessary), “WT” will display
2) Press the CLR/MC key, M will flash
3) Press the CLR/MC key again to clear the memory, or any other
key to escape
Do not place overweight items on the scale:
Err will appear on the display when weighing items over the
maximum weight capacity. Immediately remove overweight items to
avoid causing damage to your scale.
Battery Replacement:
This scale operates on one CR2032 Lithium Battery. Please replace
the battery when the low battery symbol appears on the display.
