ES330 IPPhone
www.escene.hk
Escene Communication
51
51
K_uImage_400.bin_version2.1.6: for ES410 and DS412;
K_uImage_300.bin_version2.1.6: for ES310 and DS312;
K_uImage_200.bin_version2.1.6: for ES210 and DS212
Write the new version you want to upgrade and save it on your provisioning
server.
*Please note that if the version is not older than (and same as) the one on your phone,
auto-provision of your kernel would be not available.
3.
After it, upload the new kernel to the TFTP/HTTP/HTTPS/FTP provisioning
server and complete the pre-configuration steps.
Configuration files on TFTP/HTTP/HTTPS/FTP Server
l
Name of configuration file:
The configuration file on the provisioning server is named as the MAC address of IP
phone itself. Escene ’
s IP phones support two different configuration files for
auto-provision:
1.
Normal Configuration file:
Normal Configuration file is the configuration file of your Escene IP phone. You can
download it from your phone (You can see the following chapter to see how to
download a configuration file from Escene IP hone) and modify by yourself. If the IP
phone ’
s MAC address is 00:11:22:33:44:55, the normal configuration file of it should
be
001122334455.xml
.
2.
Broadsoft Configuration files:
Broadsoft Configuration files support the format of Broadsoft IP-PBX. However, you
can use them for provisioning. There are two files should be set on your provisioning
server, they are also named by the MAC address of your phone
1)
001122334455.cfg
: a configuration file for system settings, for example,
network, audio and so on.
2)
001122334455.txt
: a configuration file for SIP accounts.
l
Download a configuration file from your phone:
You can download a configuration file from your phone by HTTP as follow:
1.
Open the web page of your IP phone, click “Phone Maintenance”>“HTTP
Upgrade”;
2.
Then click “Download” of Configuration:
