- 7 -
Do not use any soap solutions that contain
softening agents, alcohol-based solvents or
abrasive cleansers! These could destroy the
lens
q
.
Technical Data
X
Optics:
27770
27771
• Refractive power: 3.55 dpt 6,0 dpt
• Magnification: 1.9x
2,5x
• Diameter:
132 mm 132mm
X
Illumination:
• Infinitely adjustable, from 50% - 100%
• Illumination strength:
max: approx. 5000 lx at 200 mm,
min: approx. 2000 lx at 200 mm
X
LED class 1 EN 60825-1:2002
Warranty
Within the framework of the applicable
statutory provisions, we provide a warranty
for the functioning of the product described
in this manual with regard to faults arising
in connection with manufacturing errors or
material errors. In event of damage due to
improper handling, including damage from
a fall or impact, no warranty claim exists.
Warranty claims are only accepted upon
presentation of the sale receipt!
Disposal
When the device reaches the end
of its useful life, do not dispose of
it with normal household waste.
This product is subject to European
directive 2002/96/EC.
Dispose of the product or parts of the
product through a certified disposal agency
or your municipal disposal agency. Observe
the currently applicable regulations. In case
of doubt, contact your disposal agency.
Dispose of all packaging materi-
als in an environmentally friendly
manner.
9. To disconnect the device from
the power supply, unplug the AC
adapter
y
from the socket.
10. After use, close the protective lid
w
to protect the lens
q
from dust
and soiling.
Accessories
We offer a lens with 6.0 diopters as
an accessory for Art.-No. 27 770.
(magnification 2.5x, diameter 132
mm, article no.: 277701).
X
The lens is changed via the rear
lens holder
a
(in-cut part of the
lens
q
). Turn the magnifying glass
head to a vertical position so that
the lens
q
does not fall out of the
holder when loosening
the two screws. Loosen the two
screws,
then remove the holder
a
. Take
the lens
q
out of the holder and
insert the 6 dpt lens into the
holder. Make certain that it is
positioned correctly! The larger
curvature must face down.
A transparent lens protection cover
for clamping under the lens
q
is also
available for work that produces dust
or chips (article no.: 277702).
Care Instructions
When the magnifying light is not in
use, it should be covered with the
protective lid
w
.
Pull the AC adapter out of
the socket before cleaning!
Clean the housing and arm with a
damp cloth. Clean the lens
q
with a
soft, lint-free cloth (e.g. glasses clean-
ing cloth). In case of heavy soiling
(e.g. fingerprints), clean the lens
q
carefully with a damp cloth.
BDA_Lupenleuchte vario LED_V2.indd 7
31.03.2011 18:20:50
