VS Server/Player
Quick Setup Guide
6640 Intech Blvd., Suite 250
Indianapolis, IN 4627
Phone: 800-372-4368
Press "3” For Support
Mon. - Fri. 9:00am - 7pm EST
email: support@escient.com
www.escient.com
Document No.: M51003-01A1
SYSTEM REQUIREMENTS:
• High Definition TV (recommended)
• A/V Receiver for surround sound
• Gigabit Ethernet network and switch
GETTING STARTED
1
Unpack the Vision
• VS Server/Player
• Power cable
• Ethernet cable
• Remote control
• Two AA batteries
• Vision User’s Manual
• This Quick Setup Guide
A) Install the two AA batteries into the remote
B) Make note of the serial number (located on the back)
SERIAL NUMBER:___________________________________________________
2
Connect the Vision to the TV and/or A/V Receiver
Select which video and audio outputs are appropriate for your system and connect the
cables from your Vision to your TV and/or A/V Receiver according to the manufacturer's
recommended inputs for a DVD player. HDMI or Component video with digital audio
should be used for the best possible quality.
3
Connect the Vision to the Home Network
Connect the Vision to your network using the included Ethernet cable. A Gigabit switch
and Cat5e or Cat6 cabling is required for serving video from your Vision VS to Vision VC
players located in other rooms of your home.
4
Power Up the Vision
A) Connect the included power cable to the Vision
B) Connect the cable to an AC outlet
Action: The Vision’s front panel LED will flash RED until the system is ready, at which
point the LED will turn BLUE and you will see the Vision user interface on your TV
Note: Vision’s startup screens are displayed on the component video output only. It may
take up to two minutes for the video to be available on the HDMI output.
Action: Press the R1 button on the remote and follow the onscreen instructions for
configuring your Vision
REMOTE CONTROL
QUICK GUIDE
HOME
Jump directly to the Main Menu
BACK
Advance back to the previous menu
UP / DOWN / LEFT / RIGHT - OK
Directional arrows to navigate and select
OPTS
Jump directly to the Options Menu
For advanced remote features, please consult the Vision
User’s Manual.
©2008 Escient. All rights reserved. Escient and the Escient logo are registered trademarks and Vision is a trademark of Escient and DNNA. All other trademarks are property of their respective owners. Escient reserves the right to change product hardware, features and
software without notice. Upon any change, materials are updated as quickly as possible, but may not be reflected in documents already distributed. Supported hardware is updated continually. If you wish to interface with hardware that is not listed on this data sheet,
please call Escient at 800.372.4368.
The Vision System is to be used only in
accordance with copyright law. Users must
confirm that they have the right to import
content before doing so.
