20
Network Configuration
Network Factory Configuration
• IP Address……..: 192.168.0.100
• Net Mask………: 255.255.255.0
• Gateway……….: 192.168.0.1
• Command Port...: 1206
Changing the Positioner IP Address
In a Local Area Network (LAN), there cannot be more than one device using the same IP address. The IP address
of the device will need to be changed if more than one device is in the same (LAN). To change the IP address of an
ETS-Lindgren Ethernet device, use its embedded web page.
1. Point your browser to 192.168.0.100 or the address you have previously set your device to.
2. Type the new IP address as highlighted below and click ‘SET’.
Positioner
Positioner
192.168.0.100
5.9 PCA(120518:120537) Nov 9 2020
15:18:42
Summary of Contents for ETS-LINDGREN 2301
Page 1: ...2301 Positioner User Manual 1723531 Rev B January 2021...
Page 26: ......
