3
Fume Scrubber
-
2.1 Starting the Scrubber
1.
Fill the water tank with clean water
2.
Turn on the pump by connecting it to the main power source
3.
Allow 1 minute for the pump to start. Once the pump start, it won’t be long until the sprays of water can be
seen through the scrubber window (in some cases, it may take a few moments for the pump to be able to
fully charge the scrubber system piping with water).
4.
The scrubber is ready for operation
2.2 Stopping the Scrubber
1.
Turn off the pump by disconnecting it from the main power source
2.
Allow a few minutes for the water to exit the scrubber chamber and drained to the tank.
3.
Empty the tank by opening the drain valve
Summary of Contents for ENVIROSAFE
